Goodburn
 

PLASTIC WELDING TORCHES   

 
T2R WELDING TORCH
 
 

T2R WELDING TORCH

 

The T2R is our new lightweight welding torch. The hose to body connection can rotate through 270º to avoid hose "wind-up". The new thermoplastic body has internal air channel and frontal jets to reduce the temperature of the barrel.  The torch incorporates electronic temperature control giving an air jet temperature of up to 400ºC, making it suitable for welding most common types of thermoplastic material. The T2R requires an external source of dry, clean air producing 70 l/min. If the air supply is restricted, an over temperature circuit will cut the power to prolong element life. All T2C accessories will fit the T2R torch.

                                                                                                            Mobrey IMP         Sigma Data Acquisition

_______________________________________________________
 

 
T2C WELDING TORCH
 

 

The T2C is a lightweight welding torch that is ideal for production use. It incorporates electronic temperature control, giving an air jet temperature of up to 400ºC, making it suitable for welding most common types of thermoplastic material. The T2C requires an external source of dry, clean air producing 70 l/min. If the air supply is restricted, an over temperature circuit will cut the power to prolong element life.

                                                                                                                        Mobrey IMP         Sigma Data Acquisition

  T65S WELDING TORCH
 

T65S WELDING TORCH

 


The T65S torch has a built in motor driven blower and so needs no external air source, making it ideal for site work or where access is restricted. The motor has long life carbon brushes and the whole torch is extremely robust. The air jet temperature is electronically controlled up to 700ºC.

 


                                                                                                     Mobrey IMP         Sigma Data Acquisition

 

_______________________________________________________
 

  WELDING TORCH KITS
 
                   WELDING TORCH KITS  
 


These welding kits contain everything you need to start plastic welding; a welding torch (T65S torch shown but a kit containing a T2C torch is also available); a standard nozzle, tacking nozzle and high speed welding nozzle, weld preparation tools and a spare element.

A mixed bundle containing ABS, HDPE, PA, PBT, PP, PP/EPDM, PVC and Xenoy welding rods is also available to go with the kit.



                                                                                                                                  Sigma Data Acquisition

 

_______________________________________________________
 

  NOZZLES AND ACCESSORIES
 

 NOZZLES AND ACCESSORIES

  A wide range of nozzles is available to suit a variety of welding rod shapes, sizes and applications. The range includes knives and scrapers for weld preparation and wire brushes for nozzle and torch cleaning. Complete welding kits, containing torches, nozzles, accessories & a selection of plastic welding rods are also available.

                                                                                                                                                     Sigma Data Acquisition

 

Mobrey IMP

Sigma Data Acquisition

Plastic Welding

Spark Tester

 
 

        Item

Application Part Number
  Standard nozzle Low speed welding N1/1
  Extended nozzle (140mm) Low speed welding N1/2
  Extended cranked nozzle Low speed welding N1/3
  Tacking nozzle Pre-weld tacking N2
  Cast nozzle (round) High speed welding N3
  Fabricated nozzle (round) High speed welding N3F
  Cast nozzle + tacking shoe (round) High speed welding N4
  Fabricated nozzle + tacking shoe (round) High speed welding N4F
  Cast nozzle (triangular) High speed welding N5
  Fabricated nozzle (triangular) High speed welding N5F
  Cast nozzle + tacking shoe (triangular) High speed welding N6
  Fabricated nozzle + tacking shoe (triangular) High speed welding N6F
  Flat wire brush Cleaning N26
  Round wire brush (brass) Nozzle cleaning N27
  Round wire brush (steel) Nozzle cleaning N28
  Chamfering tool Joint preparation N32
  Crescent shaped knife Joint preparation N33

  Air flow gauge

Torch air flow control N43

 

Cleaning brushes
Cleaning brushes

Joint preparation scrapers
Joint preparation scrapers

Joint preparation knives - air flow gauge
Joint preparation knives - air flow gauge

_______________________________________________________
 

  AIR COMPRESSORS
 
 

AIR COMPRESSORS

 

These are small, dry running, rotary vane compressors that are suitable for operating Goodburn T2C plastic welding torches. They are compact with very low noise levels and are easy to build into other equipment.

The pumps are available in two capacities - 70 litres per minute and 155 litres per minute air flow. These capacities are suitable for operating 1 and 2 T2C torches respectively. Both models are available to suit 110V and 240V power supplies. An N43 air flow gauge is required for each torch supplied from the compressor.

                                                                                                      Mobrey IMP   Sigma Data Acquisition

                           

_______________________________________________________
 

Sitemap