Goodburn
 
 

HIGH VOLTAGE SPARK TESTERS   

 

 

 


ST-R REMOTE PROBE SPARK TESTER     
 
 

ST-R REMOTE PROBE SPARK TESTER

 

The ST-R spark tester is a remote probe type of electro-mechanical spark generator producing an output voltage that is adjustable between 10kV and 55kV.

The tester is powered by either 110Vac or 230Vac mains supply. The spark generator is housed in a thermoplastic housing and is  connected to the remote probe by 2 metres of cable. Spark generation is activated by pressing the switch on the remote probe
handle and the output voltage is adjusted using the rotary knob on the front panel.

All the accessories for the E1D unit will fit the ST-R tester

                                                               Mobrey IMP         Sigma Data Acquisition 

 

 


E1/D SPARK TESTER
 
 

E1/D portable high voltage spark tester

 

The E1/D spark tester is a hand held electro-mechanical spark generator producing an output voltage that is adjustable between 10kV and 55kV.

The tester is powered by either 110Vac or 230Vac mains supply. Suitable for intermittent use, the unit is housed in a moulded pistol shaped case enabling single handed operation. The high frequency coil is a plug-in type to allow easy replacement. A range of probes and electrodes is available to suit all applications.

                                                                                                       Mobrey IMP         Sigma Data Acquisition 

_______________________________________________________
 
  CAL55 SPARK TESTER CALIBRATOR
 
 

 


 

 
The CAL55 calibrator is designed to calibrate the output of the E1/D high frequency spark tester.

It will allow the scale on the back of the unit to be re-calibrated when necessary and can be used
to set the output spark to a pre-set voltage level.
 

                                                                                               Mobrey IMP         Sigma Data Acquisition
 

  E1/D SPARK TESTER KIT
 
 


E1/D SPARK TESTER KIT

  The E1/D Kit contains a spark tester along with the following:-

1 Spare HF coil
1 Gauze electrode
1 Copper brush electrode
1 Steel brush electrode
1 Flexible probe
1 Short pointed probe
2 200mm extension rods

All in a fitted carrying case.

                                                                                               Mobrey IMP         Sigma Data Acquisition

_______________________________________________________
 

 


SPARK TESTER PARTS, PROBES & ELECTRODES

 
 

E4 gauze electrode

E5 flexible electrode and E7 short pointed probe

E8 Copper brush electrode and E6 Steel brush electrode

E9 and E10 electrode extension rods 

 
         Item Application Part Number
  HF Coil Replacement part E3
  Gauze electrode Flat surfaces E4
  Flexible probe General use E5
  Steel brush electrode Irregular surfaces E6
  Short pointed probe Small areas E7
  Copper brush electrode Large irregular surfaces E8
  200mm extension rod Inaccessible surfaces E9
  450mm extension rod Inaccessible surfaces E10

_______________________________________________________

Sitemap